Black wire rope clips for 2 - 8mm ropes

Our black wire rope clips comply with DIN European Standard 13411-5 from 5mm rope diameter and DIN 741 from 2-4mm rope diameter and are used for detachable rope end connections with loops or thimbles.

Tested quality: Our blackened wire rope clamps are made of unalloyed steel and can be used for 2mm - 16mm thick steel ropes. Using calibrated universal tensile testing machines, the following breaking forces of the wire rope clamps could be determined:

2mm: 212kg

3mm: 442kg

4mm: 785kg

5mm: 1.226kg

6mm: 1.767kg

8mm: 3.140kg

Attention. The breaking forces of the rope clamps are given without safety factor. Please add at least a 3-5-fold safety factor for your application. The detailed test reports can be found under "Test reports" on the article page.

Please note that wire rope clamps according to DIN EN 13411-5 & DIN 741 must not be used for loads above persons, conveyor systems in mining, in rope drives of cranes or for end connections of sling ropes.

Easy handling: Self-assembly of the clamps is possible with the help of a suitable wrench, two wire rope parts are pressed together by the wire rope clamp during tightening. In addition to the installation instructions in the Technical Details, please also note that the tightening torque of the wire rope clamps must be checked after one week, after one month and then regularly every 6 months.

Versatile applications: Wire rope clips are used to connect and hold detachable rope end connections and are suitable for forming eyelets and loops. Suitable applications for wire rope end connections with wire rope clips are the suspension of static loads as well as one-time lifting operations. Please note that installation should be carried out by competent personnel, taking into account the appropriate safety factors.

Important safety note: Custom-made rope end connections with a rope diameter of 5mm or more must comply with the specifications of DIN European Standard 13411-5.