Stainless Steel Wire Rope Sling with Loops | with Stainless Steel Ferrule

The loops of the wire ropes are pressed uniformly according to DIN specifications and have a size of the rope diameter factor of 15, which results in the following loop heights and widths: 1mm rope thickness: 15mm loop height inside, 7mm loop width inside | 1.5mm rope thickness: 23mm loop height inside, 15mm loop width inside | 2mm rope thickness: 30mm loop height inside, 15mm loop width inside | 3mm rope thickness: 45mm loop height inside, 22m loop width inside | 4mm rope thickness: 60mm loop height inside, 29mm loop width inside | 5mm rope thickness: 75m loop height inside, 34mm loop width inside | 6mm rope thickness: 90mm loop height inside, 38mm loop width inside | 8mm rope thickness: 120mm loop height inside, 56mm loop width inside

Yes, the loop size allows one loop to pass through the other loop.

The minimum loop width per rope diameter is listed below: 1mm rope thickness: 3mm minimum loop width | 1.5mm rope thickness: 7mm minimum loop width | 2mm rope thickness: 8mm minimum loop width | 3mm rope thickness: 15mm minimum loop width | 4mm rope thickness: 19mm minimum loop width | 5mm rope thickness: 26mm minimum loop width | 6mm rope thickness: 33mm minimum loop width | 8mm rope thickness: 43mm minimum loop width

The specified length (desired size) refers to the complete usable length from the load-bearing point of the loop to the load-bearing point of the loop. You will find a representation of the length of the wire rope under the technical details.

Yes, the stainless steel ropes are flexible.

The ferrules have a diameter of twice the rope diameter.

We can produce a rope length of 0.20m up to a rope thickness of 6mm.