Stainless Steel Duplex Clamp for 2-6mm Ropes

Our silver salt water resistant V4A AISI 316 stainless steel duplex clamps consist of a base body with two grub screws, nuts and a clamp jaw and are used for making light wire rope end connections.

Tested quality: the silver duplex wire rope clamps can be used for 2mm - 6mm thick stainless steel ropes and can also be used for a long period of time outdoors due to the processing of high quality and stainless V4A stainless steel. Due to the low breaking forces, we recommend to use stainless steel duplex clamps only for light duty applications. With the help of calibrated universal tensile testing machines, the following breaking forces of egg-shaped clamps could be determined:

• 2mm: 91kg
• 3mm: 130kg
• 4mm: 285kg
• 5mm: 214kg
• 6mm: 400kg

Attention. The breaking forces of Duplex wire rope clamps are given without safety factor. Please add at least a 3-fold safety factor for your application. The detailed test reports can be found under "Test reports" on the article page.

Important safety note: Rope end connections with duplex clamps are not suitable for higher loads. For higher working loads, please use stainless steel ropes hydraulically pressed by us, wire rope clamps according to DIN 741 or press clamps according to DIN EN 13411.3.

Easy handling: Self-assembly of Duplex wire rope clamps is possible with the help of a suitable wrench, two wire rope parts are clamped together by the Duplex clamp during tightening. To avoid injury, the "dead rope end" can disappear into the duplex clamp.

Versatile applications: Stainless steel duplex clamps make a very high quality visual impression and can be used for simple rope end connections with loops or thimbles. Of course, our duplex clamps can be combined with all matching stainless steel ropes from the store of Drahtseile24. If you have any questions, please do not hesitate to contact us.