Suspension Cable black Set with hook and Cable Gripper with Hook

Black suspension wire rope with hook in 1mm - 3mm thickness and wire rope holder with hook

Our black, height-adjustable steel ropes meet DIN Standard 13414-1 and are available in 7x7 and 7x19 constructions (7 strands with 7 or 19 wires each). One end features a galvanized hook terminal with a spring safety, enabling quick attachment to load points without additional connectors. The opposite end is annealed for easy insertion into the wire rope holder. The set includes a wire rope holder with hook and snap safety for precise, tool-free height adjustment, perfect for suspending and adjusting loads as needed.

High safety standard: The payload of the suspension rope is specified with a 5-fold safety factor to the minimum breaking force and is crimped according to DIN-EN 12385-4.With the help of calibrated universal tensile testing machines, the following breaking forces of the hook terminals and wire rope holders with hooks could be determined:

• Wire rope holder with hook 1mm: 62kg
• wire rope holder with hook 1.5mm: 86kg
• Wire rope holder with hook 2mm: 127kg
• Wire rope holder with hook 2.5mm: 117kg
• Wire rope holder with hook 3mm: 234kg

• Hook terminal 1,5mm: 91kg
• Hook terminal 2mm: 132kg
• Hook terminal 2mm: 163kg
• Hook terminal 3mm: 356kg

Attention. The breaking forces of the wire rope holders are given without safety factor. Please apply at least a 5-fold safety factor for your application (example 1.5mm: 86kg (breaking load) : 5 (safety factor) = 17kg (working load)). The detailed test reports can be found under "Test reports" on the article page.

Easy handling: With the help of the lock nut of the wire rope holder, the steel rope can be easily and quickly adjusted in height. By tightening the lock nut, the wire rope holder is fixed on the rope and slipping is prevented. Inside the wire rope holder are three balls, which are held in the cone by a spring. Once the desired height of the wire rope holder is reached, the balls clamp the suspension rope. The wire rope is not damaged during this process. Please note that the hook is swaged directly to the wire rope and cannot be removed.

Versatile applications: Suspension ropes with wire rope holders are to be used only for the application of the determined working loads. When using them, please make absolutely sure that the locking nut is hand-tight, otherwise the wire rope may slip. Our suspension sets can be optimally used for applications where the length has to be adjusted on site. Possible applications for this are for example suspended pictures, lamps or other objects.

If you have any questions, please do not hesitate to contact us.